Choosing The Best Brush Cutter Blade

Those with larger complicated gardens might find that using the best brush cutter blade may bring a greater output on serious cutting work. Cutting through dense undergrowth requires more power than using regular grass trimmers. Instead of hiring a contractor, consider buying a brush cutter unit and do it yourself for a lesser cost. With the right combination of a perfect machine and blade partnership, you will be surprised by how amazing the result is.

Moreover, brush cutter blades are not very pricey, and if you buy the right ones, you will get a lot of use out of a single blade. So, the question here is how to determine the best brush cutter blade to use on what specific machine.

The type of blade you will need depends on what kind of vegetation you are cutting. For instance, a grass blade is for clearing clumps of grasses with long blades, while a brush knife is for removing denser grass growth like Dallisgrass, and a circular saw blade will level branches and saplings. A brush cutter blade will determine what kind of vegetation you can cut.

So, there are different types of blades for every garden cutting job. However, you would want your new brush cutter blades to be durable and last as long as possible. It should be a blade that doesn’t need constant sharpening. In searching for a new brush cutter blade, there are important details that you need to know before making your selection. To make an informed decision, here is what you need to consider.

5 Best Brush Cutter Blades For Your Brush Cutter Machine

Finally, here are five of the best brush cutters blades for your garden that we considered including in our top:

#5 Multi-use Brush Cutter Blade By Renegade Blade

Pros

• It comes with a reducer washer, allowing it to fit with either 1” (25.4mm) or 20mm Arbor Hole size.
• Carbide steel mix on its teeth is first of its class, which makes it last 10 times longer at a lesser cost.
• Also, it perfectly cuts through a small bush like butter with a hot blade. This blade is designed for multi-use. It can also be used for hedging and pruning.
• Not to mention that it is easier to sharpen.

Cons

• On the other hand, it is an 8’’ diameter blade with 80 teeth which makes it belong to the lower quality kind of blades. This size is suitable only for small and thin grasses.
• It uses carbide steel in the teeth, but the sharpness doesn’t last long enough when used in serious cutting work.
• Also, it can easily chip off if you hit any rock or metal while working. The material does not take sharp blows well. It dulls them to the point of being unusable.
• While it is not disposable, it is not practical to sharpen twice. The already sharpen blades dull faster as compared to the new ones. Thus, you will end up using the other reserve blade.

#4 ATIE Carbide Tip Brush Cutter Blade

Pros

• It has universal fit feature, making it fit for either 25.4mm or 20mm arbor size.
• Moreover, it is 80-teeth brazed welded kind of blade with 8’’ diameter, making it great for dense, heavy, and small trees or bushes.
• Its carbide tipped blades can last longer than blades with plain steel. Its blades are made with tungsten or titanium alloys. These important materials are what make this blade good and impressively sharp. It makes the machine powerful enough so that it can be used to clear shrubs of small trees.

Cons

• On the other hand, this blade can make the machine very aggressive to the point of making it hard to control the cutting rate. With this, you will end up with messy output or unrefined pruning.
• They require extreme attention to the direction of your cutting method; otherwise, it could cause injury to the user.
• It works well enough on a less powerful trimmer, but cutting will be slower for larger trees with a larger diameter.

#3 Forester Chainsaw Tooth Brush Blade

Pros

• It has 8” blade diameter and is much better than three-toothed trimmer heads. You don’t need to slam this blade into a bush. It just needs gentle swings; thus, it is less stressful on the operator.
• Also, this blade is easy to use with any trimmer that has 1’’ arbor size.
• It has 20 teeth and can fit most gas and electric trimmers on the market.
• In addition, you can use it longer than regular blades as it can be sharpened with a standard round pile. Plus, it just takes minutes to re-sharpen it.
• Not to mention that it is so versatile. With this, you can readily tackle a job that previously requires you both a chainsaw and a brush cutter.

Cons

• On the other hand, its design fails in the service of brush cutting. It dulls fast, so you have to re-sharpen it more often.
• It is ideal to have a backup blade, so you will probably end up spending twice the cost.

#2 Combo 2 Blade Pack by Renegade Blades

Pros

• This combo includes one 32-toothed blade, which is great for weeds and light vegetation, and one 80 toothed blades which are great for thicker stuff.
• Its carbide tipped teeth are so sharp; it can leave a smooth finish on twigs and branches.
• In addition, if you need to trim anything thicker than a Bermuda grass, this is a perfect choice.
• Its blades hold an edge in a decent amount of time. You can use them on bushes and small trees up to 2 inches without having to deal with major problems.

Cons

• On the other hand, this is not a practical use for the operator who doesn’t have access to its special kind of file for sharpening.
• Also, you cannot work near a fence wire or concrete because it is sensitive and dulls easily when touched against hard objects.
• The carbide steel can also be sharpened, but it is expensive to do so. Furthermore, most local repair shop probably doesn’t have one.

#1 MaxPower Brush Cutter Blade 12580 Razor Max

Pros

• This blade is designed to operate at 10,000 RPM maximum. It also has a riveted detail on its side, making it look like a chainsaw chain.
• Also, this blade is pretty tough and dulls slower as compared to other blades out there, but if you need a quick fix it can be sharpened with a 3/16 chainsaw file, In just a few minutes, it is as good as new.
• This blade is time and effort saver. You do not have to deal with switching dull blades, which means you’ll have more time in cutting.
• Last but not least, this blade has an excellent combination of good price and quality. It rips through dense brush and smaller woody vines just fine. It allows you to move the blade up and down the vines effectively, bringing them down while leaving a cleaner area in your work.

Cons

• On the other hand, this is only a practical choice if you are already a chainsaw owner . This blade will make your brush cutter as powerful as a chainsaw, so you need to have the familiarity of chainsaw’s speed and force before engaging into this.

Factors To Consider Before Choosing The Best Brush Cutter Blade

The following are the factors that you need to consider:

1. Diameter

The diameter of the blade affects the cutting power of the brush cutter. Powerful machines need wider blades in order to cut through the vegetation accurately. The larger the blades, the more power your machine needs to keep at a high enough RPM. You need to choose a good blade that can keep up with the demand of your machine’s power.

If your blade cannot spin fast enough, it will make your cleaning job more of a hassle than it should be. In this case, the blade will introduce kickback, meaning the blade cannot cut thicker vegetation and kick away from it. Blades come in three diameters 8”, 9”, and 10”.

2. Arbor Hole Size

The arbor hole is the part of the brush cutter where you attached the cutter blades. Different machines have different Arbor Hole sizes. Thus, before buying the best brush cutter blades, you need to double-check the size of your machine’s Arbor Hole. To ensure effective cutting, especially in tricky areas, the blades need to have a proper attachment to the machine. This is also necessary to prevent accidental detachment of blades that would cause injuries to the machine user.

3. Number of teeth

The number of teeth on the blades is directly proportional to the cutting power of the brush cutting machine; however, there are plain blades with no teeth. Blades with no teeth are not really recommended since they dull quickly and are only suited for very light vegetation like smaller homegrown grasses. Blades with 30-40 teeth are designed for medium-duty work as they can cut through thick brushes and brambles.

Then, there are 80-120 toothed blades. This is the most versatile among the different types of blades. This kind of blade is great if you have overgrown foliage like woody grasses and nettle. You can also hedge or prune using this blade.

4. Steel

The final thing to consider is the type of steel that the blade’s teeth are made. It is either regular steel or Carbide steel. Regular steel is your cheaper choice; plus, they are more abundant and can be easily bought from the local stores. If you are looking for blades that you can easily sharpen without going to some shops, this is the recommended one for you. Carbide steel, on the other hand, is long-lasting but a little bit more expensive. This is the wiser choice since this is far more superior to regular steel, and the price difference is just minimal.

Hopefully, this overview has guided you on some of the questions you have about brush cutter blades. You now have a better idea of the kind of blade that will fit your needs. It is important to note that when picking a blade, it is a good idea to know the exact specifications of your brush cutter. By doing so, you can ensure that your chosen blade is perfectly matched with your machine.

Final Thoughts

All in all, doing a garden cutting job in your yard or garden is never an easy task without using a reliable and efficient brush cutter blade. Also, being well-informed is the best way to make that right choice.

Among those 5 different blades that we mentioned, the Renegade blade tops number one for me. It has impressive carbide steel technology at a very affordable price. Also, in choosing the best brush cutter blade, the material of the blade is one important factor to check because it is the basis of durability. Not to mention that the length of cutting time while staying on as sharp as new is one of the carbide’s greatest qualities.

Therefore, for the best performance and versatility, MaxPower is highly recommended. It is like owning two kinds of a machine with this blade. When it comes to the price, versatility, and cutting power, MaxPower is the wisest choice anyone could make.

However, considering all the factors needed, it all comes down to personal preference in choosing the perfect blade for you. So, just keep in mind that it is just a matter of using the right blade for the right job.

Finally, thank you a lot for reading, and don’t forget to let me know your favorite brush cutter blade in the comment section below!

Pin it!